8
9
EN
High air purification power
Product air cleaning performance
Target pollutant*
Clean air delivery
rate (CADR)
Cleaning energy
efficiency grade
Particles
20m3/h
High efficiency
Formaldehyde
6.5m3/h
High efficiency
Toluene
9.5m3/h
High efficiency
TVOC
13m3/h
High efficiency
NO2
16m3/h
High efficiency
SO2
14m3/h
High efficiency
Noise* (Sound power level)
55dB(A)
Birch pollen removal**
90%
* Complying with GB/T18801-2015, tested in 3m
3
chamber
**Airmid certified SelectFilter removes upto 90% airborne birch pollens
3 Remove the old filter
as shown.
4 Using the groove,insert a new
original GoPure filter.
m
Important
The filter slides in only one way,
do not force it in.
See above.
5.2 How to restart GoPure car air purifier after
a filter replacement
m
Important
You must reset
the Philips GoPure device after
every filter replacement.
To reset your device after
replacing the filter:
1
Plug the device into the power
supply and ensure that it is
turned off.
2 Touch and hold the power
button over 3s until it emits a sound,
the filter replacement indicator is
blinking in red for 15s, filter reset
done once indicator turns off.
3 Car air purifier purifier operates
in the normal mode once top cover
is locked.
4 Repeat the above steps if the
filter reset fails.
m
Important
For you safety,
GoPure car air purifier will shut down
automatically whenever you open the
top cover.
2 Push the front side of cover.
take off top cover .
