6
7
3
How to install Philips GoPure car air purifier in your car
1. Remove liner from the
hook fastener. Avoid
touching the adhesive side.
3.1 Installation-placing under the car seat (recommended position)
2. Paste the 2 strips hook
fastener at the bottom of
the device.
Important :
It is recommended to remove
any surface contaminants
that may reduce adhesion.
Isopropyl alcohol is a good
general use solvent for
cleaning contaminants from
surfaces for example.
3. Plug in power adaptor to a
12V outlet in your car. Route
the cable under your seat
to the back. Keep the cable
away from seat rails.
m
Warning
For your safety, never
position the device under
the seat by sliding it from the
front of the seat.
Always slide it underneath
from the back of the seat.
4. Connect power cable
to device and place it
underneath the car seat from
the back.
5. Press down the device for
better attachment with
the carpet.
