GC9920
2-19
TECHNICAL INFORMATION
- Power Maximum
: 2400 W at 240 V, 10 A
Boiler :
1200
W
Iron :
800
W
Steamer
:
500
W
Board
heater
:
400
W
Fan
: 40 W
- Voltage
: 230 V
- Frequency
: 50 - 60 Hz
- Weight (product)
: 20 kg
- Weight (with package) : 24 kg
- Product dimensions
: 500 x 480 x 760 mm (L x W x H)
in storage mode
Start-up time
Approximate 2 mins
Approximate 5 mins if automatic calc-cleaning is required
Board cover
The non-scorch cover can withstand 230 deg C continuously
for 45 mins. This allows iron to be rested horizontally on the
cover during ironing.
Board heating
Heater is provided only in the active board. On the board
cover, the feeling is warmth (< 60 deg C) & not scalding
hot. For optimized performance of the appliance, the heater
is permanently on during steamer & refresh mode while
switches with iron during ironing mode.
Active ironing board
The ironing board has 2 portions: Passive & Active board.
The longer portion is the Active board. The Active board is
specially shaped for shirt or blouse during ironing, steamer
& refresh mode. It also has a bi-directional fan & board
heater that offers suction or blowing & board heating during
use. For optimized performance of the appliance, fan is
permanently on during use.
Refresh mode
During refresh mode, warm air blows out from the air vent at
the side of the active board housing. The refresh mode runs
for 10 mins & then switches off automatically. You can repeat
the refreshing by pressing the refresh button again.
Automatic calc-cleaning system
When the power-on light blinks, automatic calc-cleaning
is active. Wait 2 mins for the appliance to complete the
calc-cleaning process. After calc-cleaning is completed, the
rinse tray light blinks & a few beeps can be heard. Empty
the rinse tray & re-insert it. The 0.85 L detachable rinse
tank has suffi cient capacity for 1 rinse (rinse volume 0.55 L)
with buffer to avoid spillage while transporting to empty the
contents.
During automatic calc-cleaning, the appliance is disabled until
the process is completed.
Indicator lamp
All switch-cum-lamps on the appliance use blue LED. For
the iron & steamer light, the LED fl ashes during heat up &
burn steadily when ready. The power-on light on stand will
remain lit as long as the appliance is plugged in & the main
switch is on.
Appliance power management scheme
Please take note that the following combinations cannot be
operated simultaneously:
Iron mode + Steamer mode
Iron mode + Refresh mode
