Philips GC9655, Руководство пользователя

Страница: 8 / 34

10
ENGLISH
Before first use
This appliance is intended for ironing and refreshing fabrics only.
Remove all packaging material and stickers.
Remove the protective cover from the soleplate before you use the
appliance.
Always place the appliance on a stable and horizontal surface.
Fill the water tank before every use (see chapter ‘Using your appliance’,
section ‘Filling the water tank’).
Using your appliance
Filling the water tank
Fill the water tank before every use and when the ‘water tank empty’
light flashes.
1 Remove the water tank from the appliance.
2 Fill the water tank with tap water up to the MAX indication.
Note: Do not fill the water tank beyond the MAX indication to avoid
spillage. If you have overfilled the water tank, empty it until the water
level drops below the MAX indication again.
3 Put the water tank back into the appliance by sliding in the bottom
part first. Then push the top part until it locks into place.
Tip: Your appliance has been designed to be used with tap water. In
case you live in an area with hard water, fast scale build-up may occur.
Therefore, it is recommended to use distilled or demineralised water to
prolong the lifetime of your appliance.
Do not use perfumed water, water from the tumble dryer, vinegar,
starch, descaling agents, ironing aids, chemically descaled water or
other chemicals, as they may cause water spitting, brown staining or
damage to your appliance.
Note: Do not tilt or shake the appliance when the water tank is full,
otherwise water may spill out of the filling hole.