10
EN
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
»
[AUTO INSTALL - PRESS PLAY
KEY] (auto install - press PLAY key) is
displayed.
2
Press
to start installation.
»
[AUTO] (auto) is displayed.
»
The unit automatically stores radio
stations with sufficient signal strength.
»
When all the available radio stations
are stored, the first preset radio station
broadcasts automatically.
Tip
•
Press to exit the auto install process without saving
any radio station.
Set clock
1
In standby mode, press and hold
CLOCK
to activate clock setting mode.
»
The screen displays scrolling text [SET
TIME], then [12H] or [24H] begins to
blink.
2
Press / repeatedly to select 12 hour
or 24 hour format.
3
Press
CLOCK
to confirm.
»
The clock digits are displayed, and the
hour digits begin to blink.
4
Repeat steps 2-3 to set the hour and
minute.
Tip
•
To view the clock during play, press
CLOCK
.
Turn on
Press .
»
The unit switches to the last selected
source.
Switch to standby
Press to switch the unit to standby mode.
»
The backlight on the display panel
turns off.
»
The clock (if set) appears on the
display panel.
