18
English
IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabiliser rings or
disc treatment sheets, etc., as offered on
the market, because they may jam the
changer mechanism.
– Do not load more than one disc onto
each tray.
Playable discs
This system is able to play:
– All pre-recorded audio CDs
– All finalised audio CDR and audio CDRW
discs
– MP3-CDs (CD-ROMs with MP3 tracks)
Loading discs
(page 3 - P4)
1
Press
OPEN•CLOSE
0
on the main unit to
open the disc trays.
2
Load a disc with the label side facing up.
3
Press
OPEN•CLOSE
0
again to close the disc
tray.
➜
“
READING
“ is displayed. The selected disc
tray, total number of tracks and the playing time
will appear on the display.
Note:
– To ensure good system performance, wait until
the disc trays completely read the disc(s) before
proceeding.
Basic playback controls
Load discs
(page 3 - P4)
To play all discs on the disc trays
●
Press
ÉÅ
.
OR
In the stop mode, press
CD
to select a disc tray
to begin, then press
ÉÅ
.
➜
All the available discs will play once, then stop.
To play the selected disc only
●
Press one of the
CD 1~3
buttons on remote
control.
➜
The selected disc will play once, then stop.
To select a desired track
●
Press
–
or
+
(or
í
/
ë
on the remote control)
repeatedly until the desired track is displayed.
➜
During random play (shuffle), pressing
–
(or
í
on the remote control) will not affect the
current playback.
To search for a particular passage during
playback
●
Press and hold
4
or
¢
(or
1
/
¡
on
the remote control) and release it when the
desired passage is located.
➜
During searching, the volume will be reduced.
For a MP3 disc, the volume will be muted.
To change discs without interrupting
playback
●
Press
DISC CHANGE
.
For example, if currently disc tray 1 is playing,
you can change the discs on disc trays 2 and 3.
To interrupt playback
●
Press
ÉÅ
.
➜
To resume normal playback, repeat the
above.
To stop playback
●
Press
Ç
.
➜
If the system remains in the stop mode for 30
minutes, it will switch to the standby mode.
Disc Operations
