11
[AUTO] (auto) is displayed.
»
The unit automatically stores radio
»
stations with sufficient signal strength.
When all the available radio stations
»
are stored, the first preset radio station
is broadcast automatically.
Set clock
1
In the standby mode, press
CLOCK
to
activate the clock setting mode.
The 12 hour or 24 hour format is
»
displayed.
2
Press
ALBUM +/-
/
repeatedly to
select 12 hour or 24 hour format.
3
Press
CLOCK
to confirm.
The clock digits are displayed and
»
begin to blink.
4
Press
ALBUM +/-
/
to set the hour.
5
Press
TITLE+/-
/ to set the minute.
6
Press
CLOCK
to confirm.
Tip
To view the clock during play, press
•
CLOCK
.
Turn on
1
Press .
The unit switches to the last selected
»
source.
Switch to standby
1
Press to switch the unit to standby
mode.
The backlight on the display panel is
»
dimmed.
The clock (if set) appears on the
»
display panel.
Prepare the remote control
Note
Risk of explosion! Keep batteries away from
•
heat, sunshine or fire. Never discard batteries
in fire.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Note
If you are not going to use the remote control
•
for a long time, remove the batteries.
Do not use old and new or different types of
•
batteries in combination.
Batteries contain chemical substances, so they
•
should be disposed of properly.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
[AUTO INSTALL - PRESS PLAY] (auto
»
install - press the PLAY button) is
displayed.
2
Press on the main unit to start
installation.
3
1
2
EN
English
