Philips FWM397, Руководство пользователя

Страница: 19 / 32

English
19
Radio Reception
Tuning to radio stations
1
Press TUNER .
➜
"
FM
" or “
AM
” is displayed. A few seconds later,
the current radio frequency will appear on the
display.
2
Press
TUNER
again to select the desired
waveband : FM or AM.
3
Hold
S
/
T
(or
ALBUM +/-
( à / á )
on the remote control) and then release the
button.
➜
The system will start searching for a radio
station with sufficient signal strength.
4
Repeat step
3
if necessary until you find the
desired station.
●
To tune to a weak station, press
S
/
T
(or
ALBUM +/-
( à / á ) on the remote control)
briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
1
Press
TUNER
to select TUNER mode.
2
Press and hold
PROG
(or
PROGRAM
on the
remote control) until "
AUTO
" is displayed.
➜
PROG
starts flashing.
➜ AUTO
is displayed and available stations are
programmed in order of waveband reception
strength.
➜
When all the available radio stations are
stored or the memory for 40 presets are used,
the first preset radio station will be played.
To stop storing the automatic preset
●
Press Ç .
Manual programming
1
Tune to your desired radio station (refer to
“Tuning to radio stations”).
2
Press
PROG
(or
PROGRAM
on the remote
control).
➜
PROG
starts flashing.
➜
The next available preset number is displayed
for selection.
MP3 LINK
pg001-031_FWM397_78_Eng 4/28/08, 14:39 19