Philips FWM397, Руководство пользователя

Страница: 13 / 32

English
13
Basic Functions
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Plug and Play
(for tuner installlation)
Plug and Play allows you to store all available
radio stations automatically.
First time setup/power up
1
When you turn on the main supply, "
AUTO
INSTALL
-
PRESS PLAY
" is displayed.
2
Press ÉÅ to start installation.
➜
"
PLUG AND PLAY
" .... "
INSTALL
" is
displayed, followed by "
AUTO
".
➜
All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
➜
When all the available radio stations are
stored or the memory for 40 presets are used,
the first preset radio station will be played.
To reinstall Plug and Play
1
In standby mode
, press and hold ÉÅ until
"
AUTO INSTALL - PRESS PLAY
" is displayed.
2
Press ÉÅ again to start installation.
➜
All previously stored radio stations will be
replaced.
To exit without storing the Plug and Play
●
Press Ç .
➜
If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If no stereo frequency is detected during Plug
and Play, "
CHECK ANTENNA
" will be displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
Switching the system on
●
Press 2 .
➜
The system will switch to the last selected
source.
●
Press
DISC (
or
DISC 1/2/3
,
CD 1/2/3)
,
TUNER , AUX / MP3 LINK (or AUX ) or USB .
➜
The system will switch to the selected source.
●
Press
OPEN•CLOSE
or
DISC CHANGE
.
➜
The system will switch to the disc source and
the disc tray will open.
MP3 LINK
pg001-031_FWM397_78_Eng 4/28/08, 14:39 13