13
English
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
●
In standby mode
, press and hold
Ç
on the
system until "
WELCOME
" is displayed.
➜
The demonstration will begin.
To deactivate the demonstration
●
Press and hold
Ç
on the system until
"
DEMO OFF
" is displayed.
➜
The system will switch to standby mode.
Note:
– If you have not deactivated the demonstration,
it will resume five seconds after the system
switches to Eco Power standby or standby mode.
Switching the system on
In standby/demonstration mode
●
Press
STANDBY ON
to switch on the last
selected source.
●
Press
CD 1/2/3
,
TUNER
or
TAPE
(
TAPE 1/2
).
●
Press
OPEN/CLOSE
.
In Eco Power standby mode
●
Press
ECO POWER
to switch on the last
selected source.
●
Press
CD 1/2/3
,
TUNER
or
TAPE 1/2
on the
remote control.
Switching the system to standby
mode
In demonstration mode
●
Press and hold
Ç
on the system.
In any other source mode (except Eco
Power standby mode)
●
Press
STANDBY ON
(or
B
on the remote
control).
➜
The clock will appear on the display when the
system is in standby mode.
Switching the system to Eco
Power standby mode (< 0.5 Watt)
●
Press
ECO POWER
(or press and hold
B
on
the remote control).
➜
"
ECO PWR
" is displayed, then the display
screen will go blank.
➜
The low power ECO POWER LED will be
lighted.
Dim mode
You can select the desired brightness for the
display.
●
In any source mode (except standby mode),
press
DIM MODE
repeatedly to select : DIM 1,
DIM 2, DIM 3 or DIM OFF.
➜
DIM
is shown, except for DIM OFF mode.
DIM
mode
1
2
3
OFF
Brightness
normal
half
half
normal
Spectrum
Analyser
off
on
off
on
Note:
– In standby mode, pressing DIM MODE to select
half or full brightness for clock display.
Basic Functions
PG 001-028_FWM15_22-ENG
23/11/04, 10:57
13
