17
English
EN
6 Listen to radio
The unit can automatically search and
store radio stations. You can also search
and store radio stations manually.
Store radio stations
automatically
If no radio stations are stored, the unit
can store radio stations automatically.
1
Turn on the unit.
2
Press
RADIO
.
»
[AUTO INSTALL PRESS PLAY]
(press
to start automatic installation) is
displayed.
3
Press
.
»
The unit automatically stores radio
stations with sufficient signal strength.
»
After all available radio stations are
stored, the first stored radio station is
broadcast automatically.
•
To stop automatic installation, press .
Tune to a radio station
1
Press
RADIO
.
2
Press / ( / ).
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
•
To tune to a weak station, press /
repeatedly until you find optimal
reception.
Tip
•
[STEREO]
is the default setting for tuner mode.
•
In tuner mode, you can press
RADIO
repeatedly to
switch between
[STEREO]
and
[MONO]
. The unit
memorizes your setting even if you turn off the unit or
turn to other sources.
Program radio stations
Note
•
You can program a maximum of 40 preset radio
stations.
Program radio stations automatically
•
Press and hold
REPEAT
/
PROGRAM
for
more than 2 seconds to activate automatic
programming.
»
All available stations are programmed
in the order of waveband reception
strength.
»
The first programed radio station is
broadcast automatically.
Program radio stations manually
1
Tune to a radio station (see 'Tune to a
radio station' on page 17).
2
Press
REPEAT
/
PROGRAM
to activate
programming.
3
Press / to allocate a number from
1 to 40 to this radio station, then press
REPEAT
/
PROGRAM
to confirm.
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the previous steps to program
other stations.
