13
English
EN
2
Select (
[Video Setup]
).
3
Select
[TV System]
and then press
( ).
4
Select a setting and then press
OK
.
•
[PAL]
- For TV with PAL color system.
•
[NTSC]
- For TV with NTSC color
system.
•
[Multi]
- For TV that is compatible with
both PAL and NTSC.
5
To exit the menu, press
SETUP
.
Change system menu
language
1
Press
SETUP
.
2
Select (
[General Setup]
).
3
Select
[OSD Language]
and then press
( ).
4
Select a setting and then press
OK
.
5
To exit the menu, press
SETUP
.
Turn on progressive scan
Note
•
To use the progressive scan feature, you need to
connect a progressive scan TV with the component
video sockets (see 'Option 1: Connect to the
component video sockets' on page 10).
1
Turn on the TV to the correct viewing
channel for this unit.
2
Press
SETUP
.
3
Select (
[Video Setup]
).
4
Select
[Progressive]
->
[On]
, and then
press
OK
.
»
The progressive setup is complete.
Note
•
If a blank/distorted screen is displayed, wait for 15
seconds for the auto recovery.
•
If no picture is displayed, turn off the progressive scan
mode as follows:
•
1) Press to open the disc compartment.
•
2) Press .
•
3) Press
AUDIO
.
5
Press
SETUP
to exit the menu.
»
You can now turn on the progressive
scan mode on the TV (see the TV user
manual).
Note
•
During play, when the progressive scan mode is on for
both this unit and the TV, distorted picture may display.
In this case, turn off the progressive scan feature on
both this unit and the TV.
