31
English
Tape Operation/Recording
IMPORTANT!
–Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may
get jammed or may burst in the
mechanism.
– Store tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV set
or speaker).
Tape playback
●
Only cassette keys can be used for tape playback
control.
1
Press
70
to open the tape deck door.
2
Insert a recorded tape and close the tape door.
●
Load the tape with the open side down and the
full spool to the left.
3
Press
SOURCE
key on the front panel to
select tape mode.
(or press
3
to switch to TAPE source directly)
4
Press
3
to start playback.
Interrupting playback
●
Press
8
to interrupt playback.
Stopping playback
●
Press
70
to stop playback.
Rewinding or forwarding fast when
playback is stopped
1
Press
1
or
¡
on the front panel.
2
Press
70
when you reach the desired passage.
General information on
recording
●
If you don’t intend to record via the microphone,
unplug it to avoid unwanted recording source.
●
For recording, only use tape of IEC type I(normal
tape).
●
The recording level is set automatically, regardless
of the position of the Volume, Vocal, Key control
and so forth.
●
The type is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for seven seconds.
●
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
●
Press
●
in Disc / USB , Tuner or AUX mode, the
record key
●
can’t be press if there is no
recordable tape in tape deck.
FWD185 final IFU ( v1.1)
1/1/32, 3:24 AM
31
