22
English
Tape Operation / Recording
Preparation for recording
1
Load a recordable tape into tape deck 1 with full
spool to the left.
2
Prepare the source to be recorded.
CD 1/2/3
– load the disc(s).
TUNER
– tune to the desired radio station.
TAPE
– load the prerecorded tape into tape
deck 2 with the full spool to the left.
AUX
– connect external equipment.
When recording is in progress
➜
REC
starts flashing.
●
It is not possible to listen to another source.
●
It is not possible to activate the timer function
during recording or tape dubbing.
One touch recording
1
Press
CD 1/2/3
,
TUNER
or
AUX
to select
the source.
2
Start playback of the selected source.
3
Press
●
on tape deck 1 to start recording.
To stop recording
●
Press
70
on tape deck 1.
CD Synchronised start recording
1
Press
CD 1
/
2
/
3
to select the disc.
●
You can programme the tracks in the order you
want them to be recorded (refer to “CD
Operation - Programming the disc tracks”).
2
Press
●
on tape deck 1 to start recording.
➜
The disc will start playback automatically.
To stop recording
●
Press
70
on tape deck 1, then press
Ç
to stop
disc playback.
Note:
– During CD synchronised start recording, do not
fast forward/rewind the tape in tape deck 2.
Dubbing tapes
1
Load the prerecorded tape in tape deck 2.
●
Make sure both tapes have their full spool to the
left.
2
Press
Å
on tape deck 1 and followed by
●
.
3
Press
É
on tape deck 2.
➜
Recording will start automatically.
●
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
●
Press
70
on tape deck 1 and 2.
Notes:
– Dubbing of tapes is possible only from tape
deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of the same
length.
PG 001-028/C270/21-ENG
10/10/03, 12:15 PM
22
