English
3139 116 19341
15
TUNER
Automatic programming
1
Press
TUNER
(BAND).
2
Press
PROGRAM
for more than one
second.
™
The
PROG
flag starts flashing and
“
AUTO
” will be displayed.
™
The system will start searching for all
radio stations with RDS and then
followed by radio stations on FM and
MW band respectively.
™
All available stations will be stored
automatically. The frequency and
preset number will be displayed
briefly.
™
The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
™
The system will remain tuned to the
last stored preset radio station.
Notes:
– You can cancel the automatic
programming by pressing PROGRAM or
Ç
(on the system only).
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming, only
the preset numbers 10 to 40 will be
programmed.
Manual programming
1
Press
TUNER
(BAND).
2
Press
TUNER
(BAND) to select the
desired waveband : FM or MW.
3
Press
PROGRAM
for less than one
second.
™
The
PROG
flag starts flashing.
™
The next available preset number will
be displayed for selection.
4
Press
à
or
á
to tune to the desired
frequency.
• If you wish to store the radio station to
another preset number, press
4
or
3
to
select the desired preset number.
5
Press
PROGRAM
again.
™
The
PROG
flag disappears and the
radio station will be stored.
• Repeat
steps 3 – 5
to store other preset
radio stations.
Notes:
– When 40 radio stations are stored and
you attempt to store another radio
station, the display will show
"
PROGRAM FULL
”. If you want to
change an existing preset number,
repeat steps 3 – 5.
– You can cancel manual programming by
pressing
Ç
(on the system only).
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Tuning to Preset Radio
Stations
• Press
4
or
3
to select the desired
preset number.
™
The preset number, radio frequency,
and waveband appear on the display.
Receiving RDS Radio Station
Ç
RDS (Radio Data System) is a broadcasting
service that allows FM stations to send
additional information along with the
regular FM radio signal. This additional
information can contain:
•
STATION NAME:
The radio station
name is displayed.
•
PROGRAM TYPE:
The following
program types exist and can be received
by your tuner: News, Affairs, Info, Sport,
Educate, Drama, Culture, Science,
Varied, Pop M, Rock M, M.O.R. (middle
of the road music), Light M, Classics,
Other M, No type.
•
RADIO TEXT (RT):
text messages
appear in the display.
When you have tuned to a RDS station, the
RDS logo (
Ç
) and the radio station name
will appear on the display:
• The display normally shows the radio
station name if available.
By repeatedly pressing
RDS
button you
can change the type of display
information:
™
The display shows in turn:
STATION NAME
™
PROGRAM
TYPE
™
RADIO TEXT
™
TUNED FREQUENCY
™
STATION NAME
...
Note:
– When you press the RDS button and the
display shows "
NO RDS
", it indicates
that either the tuned station is not
transmitting RDS signal or it is a non
RDS station.
RDS Clock
Some RDS station may be transmitting a
real clock time at an interval of every
minute.
Setting the time with RDS clock
1
Press
CLOCK•TIMER
.
™
"
--
:
--
" or current time appears on
the display.
2
Press
CLOCK•TIMER
once more to
enter clock setting mode.
™
"
00
:
00
" or "
12
:
00
"
AM
current time
starts flashing.
pg 01-24/C28/34-Eng
2/23/00, 8:06 AM
15
