Philips FW-C21, Руководство по обслуживанию

Страница: 12 / 72

2-6
PCS 103 337
17
TUNER
Storing Preset Stations
You can store up to 40 radio stations in
the memory. When a preset radio
station is selected, the preset number
appears next to the frequency on the
display.
Automatic programming
1
Press TUNER (FM•AM).
2 Press PROGRAM for more than
one second.
™
The
PROG
flag starts flashing and
“
AUTO
” will be displayed.
™
The system will search for every
available station in the FM
waveband first, then search the
AM waveband.
™
All available stations will be stored
automatically. The frequency and
preset number will be displayed
briefly.
™
The system will stop searching
when all the available radio
stations are stored or when the
memory for 40 preset radio
stations is used.
™
The system will remain tuned to
the last stored preset radio
station.
Notes:
– You can cancel the automatic
programming by pressing PROGRAM or
Ç
(on the system only).
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10
before starting automatic programming,
only the preset numbers 10 to 40 will
be programmed.
Manual programming
1
Press TUNER (FM•AM).
2 Press TUNER (FM•AM) again to
select the desired waveband : FM or
AM.
3 Press PROGRAM for less than one
second.
™
The
PROG
flag starts flashing.
™
The next available preset number
will be displayed for selection.
4 Press
à
or
á
to tune to the
desired frequency.
• If you wish to store the radio station
to another preset number, press
4
or
3
to select the desired preset
number.
5 Press PROGRAM again.
™
The
PROG
flag disappears and
the radio station will be stored.
• Repeat steps 3 – 5 to store other
preset radio stations.
Notes:
– When 40 radio stations are stored and
you attempt to store another radio
station, the display will show
"
PROGRAM FULL
”. If you want to
change an existing preset number,
repeat steps 3 – 5.
– You can cancel manual programming
by pressing
Ç
(on the system only).
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Tuning to Preset Radio
Stations
• Press
4
or
3
to select the desired
preset number.
™
The preset number, radio
frequency, and waveband appear
on the display.
18
TAPE
SOUND NAVIGATION - JOG
STANDBY-ON
PROGRAM CLOCK•TIMER DIM
FULL AUTO STOP
MASTER
VOLUME
TAPE 2 TAPE 1
PLAY STOP.OPEN
PAUSE
▲
RECORD
PLAY STOP.OPEN PAUSE
▲ ▲
▲ ▲
FW-
C10
MINI HIFI SYSTEM
C D 1 • 2 • 3 FM • AM TAPE 1 • 2
TAPE CD TUNER AUX
PRESET
▲
▲
TUNING
▲ ▲ ▲ ▲
STOP• CLEAR SEARCH PLAY• PAUSE PREV NEXT
D
B
B
VIDEO
▲ ▲ ▲ ▲ ▲ ▲
OPTIMAL
JAZZ
ROCK
TECHNO
JOG
CONTROL
Loading a tape
1 Press STOP•OPEN .
2 The tape deck door opens.
3 Load the tape with the open side
downward and the full spool to the
left.
4 Close the tape deck door.
Tape Playback
1 Press
TAPE
to select TAPE mode.
™
"
TAPE
" will be displayed.
2 Load the tape into the selected tape
deck.
3 Press PLAY
É
to start playback.
• To interrupt playback, press PAUSE .
• To resume playback, press PAUSE
again.
4 Press STOP•OPEN to end
playback.
Rewind/Fast Forward
When playback is stopped
1
You can rewind or fast forward a
tape by pressing
à
or
á
,
respectively.
™
The tape will stop automatically at
the end of rewinding or fast
forwarding.
2 Press STOP•OPEN to stop
rewinding or fast forwarding.
Continuous Playback From
Tape Deck 2 to Tape Deck 1
1 Press TAPE to select TAPE mode.
2 Load the tapes in tape decks 1 and 2.
3 Press PLAY
2
on tape deck 2.
4 Press PAUSE on tape deck 1.
5 Press PLAY
2
on tape deck 1.
™
Playback will begin with tape deck
2 and will continue with tape deck
1 when playback on tape deck 2
ends.
6 Press STOP•OPEN if you want to
stop playback before the end of the
tape in tape deck 1 or tape deck 2.
Notes:
– During rewinding or fast forwarding of a
tape, it is also possible to listen to
another source (e.g. CD, TUNER or
AUX).