Philips FTR9965/17SB, Руководство пользователя

Страница: 13 / 30

11
(Sound menu)
Picture Sound Features Channels
Auto sound
Volume
Treble
Bass
Balance
Headphone volume
Sound mode
Alt audio
(Audio only)
TV
Note : In case you connect your TV receiver box with a speakerless monitor and without having
connected an audio receiver, all references made to sound reproduction, volume control and
audio connections are not applicable.
Press the cursor right to select
Sound
.
Select the menu items with the cursor up/down and adjust the settings with the cursor
left/right.
Remember, control settings are at normal mid-range levels when the bar scale is
centered.
Auto sound
Select Auto sound to display a list of predefined sound settings, each corresponding
with specific factory settings of treble and bass.
Press the cursor right to enter the list.
Press the cursor up/down to select a predefined sound setting.
Personal refers to the personal preference settings in the
Sound
menu.
Note: The moment you are in a predefined Auto sound setting and you modify a setting in the
Sound menu, all values of the menu will overwrite the previously made personal settings.
Volume
Allows you to adjust the volume level.
Treble
Attenuates or amplifies the high-frequency response of the audio output signal.
Bass
Attenuates or amplifies the low-frequency response of the audio output signal.
Balance
Allows you to adjust the balance of the right and left speaker’s sound output.
Headphone volume
Allows you to adjust the volume level of the headphone.
Sound mode
Surround Mode can only be selected when the sound of the TV channels is stereo.
When
Sound mode On
is selected, it seems as though the loudspeakers are spread
further apart from one another.
Alt Audio
When you tune a channel where SAP (Second Audio Program) is available, you can
toggle between
Main
and
SAP
.
Press the cursor right to make your preferred audio selection.
If SAP is not available, only Main is selected.
Audio only
Enables you to blank the TV picture if the monitor is used as center speaker in a
configuration with an audio receiver.
Select
Audio only O
n to only hear the sound and to switch off the picture.