9
EN
6 Notice
Notice of compliance
Notice for US
This set complies with the FCC rules,
Part 15 and with 21 CFR 1040.10.
Operation is subject to the following
two conditions:
a
This device may not cause harmful
interference, and
b
This device must accept any
interference received, including
interference that may cause
undesired operation.
FCC rules
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instruction manual, may
cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio
or television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to
try to correct the interference by one or
more of the following measures:
•
Relocate the receiving antenna.
•
Increase the separation between
equipment and receiver.
•
Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
•
Consult the dealer or an
experienced radio/TV technician for
help.
FCC Radiation Exposure Statement:
This equipment complies with FCC
radiation exposure limits set forth for
an uncontrolled environment. This
equipment should be installed and
operated with a minimum distance of
20cm between the radiator and your
body. This transmitter must not be co-
located or operated in conjunction with
any other antenna or transmitter.
Warning:
Changes or modifications
made to this equipment not expressly
approved by Gibson Innovations may
void the FCC authorization to operate
this equipment.
Model number:
Flite
(SHB4205)
Trade Name: Philips
Responsible party: Gibson Innovations
USA Inc. P.O.Box 100572 Nashville TN
37224
Notice for Canada:
This device complies with Industry
Canada licence-exempt RSS
standard(s). Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
This Class B digital apparatus complies
with Canadian ICES-003.
IC Radiation Exposure Statement
:
This equipment complies with Canada
radiation exposure limits set forth for
uncontrolled environments.
This transmitter must not be co-located
or operating in conjunction with any
other antenna or transmitter.
