10
EN
Manual pair-up with the main
unit
The wireless speakers and subwoofer
automatically pair up with the main unit (left
and right base speakers) for wireless connection
when you turn on the main unit, the speakers
and the subwoofer.
Manual pair-up with the main unit is required in
one of the following cases.
• Audio from the main unit cannot be
heard through the wireless speakers and
subwoofer.
• More than 1 set of
Philips E6
is used in
close proximity (10m).
1
Dock the wireless surround speakers onto
the main unit.
2
Turn on the main unit and the subwoofer.
3
Press the
(connect) button on
the subwoofer to enter the pairing mode.
»
The indicator on the subwoofer blinks
quickly.
4
In HDMI ARC mode (press
HDMI ARC
),
within six seconds, on the remote control,
press twice then
once, and
then hold down
BASS +
.
»
If the pairing succeeds, the indicator on
the subwoofer lights up.
»
If the pairing fails, the indicator on the
subwoofer blinks slowly.
5
If the pairing fails, repeat the steps above.
Note
•
If there is no sound from the wireless surround
speakers which are undocked (or the LED on the
wireless surround speaker blinks in red and orange
alternatively), you may dock then undock the surround
speakers to make wireless connection with the main
unit.
Place speakers
For best sound effect, position all the speakers
towards the seating position and place them
close to your ear level (seated).
Note
•
Surround sound depends on factors such as room
shape and size, type of wall and ceiling, windows and
reflective surfaces, and speaker acoustics. Experiment
with the speaker positions to find the optimum setting
for you.
Follow these general guidelines for speakers
placement.
1
Seating position:
This is the center of your listening area.
2
Place the main unit (left and right base
speakers) in front of the seating position.
3
L
/
R
surround speakers (left/right):
Place the rear surround speakers to the
left and right side of your seating position,
either in line with it or slightly behind it.
SUB
WOOFER
R
L
