Philips FC9202, Руководство пользователя

Страница: 8 / 20

You can store two accessories at a time in the accessory holder:
◗
Crevice tool and small nozzle (specific types only) (fig. 12).
Please note the way in which the small nozzle must be placed in the accessory holder.
◗
Crevice tool and small brush (fig. 13).
Using the appliance
1 Pull the cord out of the appliance and put the mains plug in the wall socket.
2 Switch the appliance on by pressing the on/off button on top of the appliance (fig. 14).
◗
During vacuum cleaning you can adjust the suction power by means of the knob on top of
the appliance (fig. 15).
- Use maximum suction power for vacuum cleaning very dirty carpets and hard floors.
- Use minimum suction power for vacuum cleaning curtains, table carpets, etc.
◗
If you want to pause for a moment, you can park the tube in a convenient position by
inserting the ridge on the nozzle into the parking slot (fig. 16).
Storage
1 Switch the appliance off and remove the mains plug from the wall socket.
2 Rewind the mains cord by pressing the cord rewind button (fig. 17).
3 Attach the nozzle to the appliance by inserting the ridge on the nozzle into the slot. Store
the appliance in horizontal position, with all wheels touching the floor (fig. 16).
4 Always put the Tri-Active nozzle in the carpet setting when you store it and prevent the side
brushes from becoming bent (fig. 9).
Emptying the dust bucket
Always unplug the appliance before emptying the dust bucket.
The dust bucket is not dishwasher-proof.
◗
Empty the dust bucket as soon as the dust level has reached the round disc of the filter
cylinder case (fig. 18).
1 Switch the appliance off and disconnect the hose from the appliance.
2 Unlock the cover by pressing the release button on top of the handle of the dust bucket (1).
Swing the cover open (2) (fig. 19).
3 Remove the bucket by lifting it out of the appliance (fig. 20).
4 Hold the bucket over a dustbin and lift the filter cylinder case out of the bucket. Empty the
bucket (fig. 21).
5 If you wish, you can clean the dust bucket with cold tap water and some washing-up liquid.
6 Put the filter cylinder case back into the dust bucket and put the bucket back into the
appliance.
7 Close the cover firmly ('click').
Always put the filter cylinder case back into the bucket, otherwise the appliance cannot be
switched on.
ENGLISH
8