POWER SUPPLY
POWER SUPPLY/LINE OUT
8
9
With this set you can use :
• alkaline batteries (type
LR6
,
UM3
or
AA
)
Inserting batteries
1
Open the battery compartment and insert
2 alkaline batteries.
Notes: – Old and new or different types of batteries
should not be used in combination.
– Remove batteries if they are empty or if the
set will not be used for a long time.
Batteries contain chemical substances, so they should be disposed of properly.
Battery indication
• The battery symbol on the display is divided into 3 segments which indicate the
approximate power capacity of the batteries. Full battery capacity is shown by
three segments.
Indication of empty batteries
• Replace the batteries or connect the mains adapter
as soon as
A
flashes and
bAtt
is displayed.
Notes: The average playing time of batteries under normal conditions.
Battery type
ESP on
ESP off
CD Normal
6 hours
7 hours
CD Alkaline
14 hours
18 hours
MP3 Normal
4 hours
N/A
MP3 Alkaline
10 hours
N/A
Batteries
(not included)
Only use the AY 3170 mains adapter
(4.5 V/300mA direct current, positive pole to the
centre pin). Any other product may damage the set.
1
Make sure the local voltage corresponds to the
adapter’s voltage.
2
Connect the mains adapter to the 4.5V DC
socket of the player and to the wall socket.
Note: Always disconnect the adapter when you are not using it.
You can connect the CD player to an additional
appliance, E.g. amplifier, radio cassette recorder, etc.,
with a LINE IN socket.
1
Turn down the volume on the additional appliance.
2
Connect an audio signal cable (not supplied,) to the
LINE OUT socket of the CD player and the CD IN,
AUX IN or LINE IN socket of the additional appliance.
3
To adjust the sound and volume, use the controls on
the connected appliance.
Line out
MODE
CD REWRITABLE COMP
ATIBLE
MAGIC ELECTR
ONIC SKIP
PROTECTION
Mains adapter
(supplied or optionally available)
English
English
0
EXP101/01 eng 6/14/00 4:10 PM Page 8
