31
2
Recording Basics
e
To take the picture, depress the Release
button completely.
The Flash LED will light to indicate that an image
is recorded.
If the image is recorded, the remaining number of
images that can be recorded appears on the LCD
monitor.
When Forced Flash or Auto Flash is set:
When taking a flash photo in dark locations, the
Flash LED will light when the Release button is
pressed lightly.
Note: The strobe lamp flashes when the flash is charging. A
photo cannot be taken at this time.
Tip:
If no operation is performed for five minutes or longer while the power is on, the Auto Power Off
function dims the LCD monitor to save power. Turn off the Auto Power Off function if a certain
amount of time is required until a picture can be taken. Prepare a spare set of batteries; the
batteries may be worn out if they are used for a long time. Connect an optional AC adaptor to
use the camera with power from an electrical outlet.
Note: See “Setting the Auto Power Off mode” on page 56.
Tip:
You may disable the LCD monitor during recording.
The following message appears when the FLASH button is pressed while pressing the
U
and
T
buttons. Press the
U
or
T
button to switch ON and OFF.
á
DATE
