10-4
1. Loosen screw
A
2. Remove cover as shown in picture 1
picture 1
3. Loosen screw
B
(see picture 2)
4. Open slot loader
picture 2
5. Loosen 3x screw
C
(see picture 3)
6. Disconnect wire
D
and flex-foil
E
Attention: Flex-foil
E
is fixed to the printed circuit board
with a double-sided adhesive tape.
picture 3
Attention: The laser diode of this CD drive is protected
against ESD by a solder joint which short-circuits
the laser diode to ground.
For proper functionality of the CD drive this
solder joint must be removed after connecting
the drive to the set.
Don’t forget to fix the flat-foil again. Pay attention in the wire-
dressing. (see picture 4)
picture 4
Service Hints -
Replacing the CD Drive
Mount the upper part of the
slot loader. Pay attention in the
wire-dressing.
picture 5
Содержание EMOTIVE Micro MZ-1000
Страница 34: ...8 10 TECHNICAL REMARKS ...
Страница 61: ...Set Exploded View MZ 1000 _3139 119 34940_dd wk 0224 11 1 11 1 SET MECHANICAL EXPLODED VIEW MZ 1000 ...
Страница 62: ...Set Exploded View MZ 1100 _3139 119 35030_dd wk 0231 11 2 11 2 SET MECHANICAL EXPLODED VIEW MZ 1100 ...
Страница 63: ...Set Exploded View MZ 1200 _3139 119 35060_dd wk 0231 11 3 11 3 SET MECHANICAL EXPLODED VIEW MZ 1200 ...