Philips EM7U LCOS, Руководство по обслуживанию

Страница: 6 / 104

Remote Control Figure 1
When the set is turned On via the Keyboard or Remote Control, the set will take
approximately 30 seconds to display a picture. By using the Select button, the
Remote can be used to control other devices. A list of setup codes for other
devices is located in the customer's operator’s manual. The customer can select
the Menu button on the Remote to make additional selections and adjustments as
desired. Use the cursor right and cursor down buttons on the Remote to select the
desired topic.
When Picture is selected, use the cursor down
button to select the desired subtopic. For example, press the
cursor down button to select Contrast then use the cursor left
and cursor right buttons to change the values. Additional dots
on the lower part of the line indicate that additional selections
are present. Continue to press the cursor down button to make
these selections.
When Picture is selected, use the
cursor down button to select the
desired subtopic. (Figure 2) For example, press the cursor
down button to select Contrast then use the cursor left and cur-
sor right buttons to change the values. Additional dots on the
lower part of the line indicate that additional selections are pre-
sent. Continue to press the cursor down button to make these
selections.
Under Color Temperature, there are
three selections: Normal, Warm,
and Cool. (Figure 3) With the Normal selection, the picture dis-
plays a normal Gray Scale. If the customer desires a reddish tint
to the picture, Warm is selected. Cool shifts the picture's gray
scale in the direction of Blue.
With sets with Pixel Plus, the C
customer can select between
Progressive Scan and Pixel Plus.
(Figure 4) Pixel Plus provides additional picture enhancement.
FIGURE 1 - MAIN MENU
FIGURE 2 - PICTURE
SELECTION
FIGURE 3 - COLOR
TEMPERATURE
FIGURE 4 - PIXEL
PLUS SELECTION
Pictures with Pixel Plus Off (left) and On (right).
Page 3