6
Connect power
Caution
Risk of product damage! Ensure that the power supply
•
voltage corresponds to the voltage printed on the back
of the unit.
Before connecting the AC power cord, ensure you have
•
completed all other connections.
Note
The type plate is located on the back of the product.
•
1
Connect the AC power cord to:
this product.
•
the wall socket.
•
This product is ready to be set up for use.
»
4 Get
started
Prepare the remote control
1
Press and push the battery compartment to
slide it open (see “1” in the illustration).
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Push and slide back the battery compartment
(see “3” in the illustration).
Note
If you are not going to use the remote control for a long
•
time, remove the batteries.
Do not mix batteries (old and new or carbon and
•
alkaline, etc.).
Batteries contain chemical substances, so they should be
•
disposed of properly.
Find the TV input channel
1
Press to turn on this product.
2
Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).
Connect to digital amplifier/receiver
1
Connect a coaxial cable (not supplied) to:
the
•
COAXIAL
jack on this product.
the COAXIAL/DIGITAL input jack on
•
the device.
Connect analogue stereo system
1
Connect the audio cables to:
the
•
AUDIO OUT L/R
jacks on this
product.
the audio input jacks on the device.
•
Connect a USB flash drive
1
Connect a USB flash drive to the
jack on
this product.
Note
This product can only play/view MP3, WMA or JPEG files
•
that are stored on a USB flash drive.
Press the
•
button to access the content and play
the files.
COAXIAL
DIGITAL AUDIO
INPUT
English
EN
