English
28
DVD to Videotape Duplication
Follow the steps below to copy a DVD to a videotape.
This will
be possible only if the DVD is not copy protected.
Before you begin:
●
Put a videotape in the cassette compartment. Make sure the
tape’s record tab is intact and the tape is long enough to record
the DVD.
●
Put the DVD you want to copy in the disc tray.
●
Press VCR so VCR light appears on the front of the DVD/VCR.
●
Turn on the TV and set it to the correct Video In channel.
(Check your TV owner’s manual for details.)
1
Press INPUT repeatedly until
“DISC” appears on
the TV screen.
2
Press SPEED repeatedly until the desired tape
speed (SP or SLP) appears briefly on the screen.
Details about tape speed are on page 57.
3
Press REC
I
to start recording.
“REC” will appear
on the display panel.
4
Press DVD. Press PLAY
B
to play the disc.
●
To pause the recording, press VCR, then press
PAUSE
k
once. “REC” will flash.
●
To resume recording, press REC
I
or press PAUSE
k
again. “REC” will reappear.
●
To stop recording, press VCR, then press STOP
C
.
DISC
2
4
DVD
VCR
SETUP
INPUT
MENU
REC
SPEED
MODE
ANGLE
SEARCH
REPEAT
DISPLAY SUBTITLE
ZOOM
TIMER SET
REPEAT
A B
AUDIO
BACK
PAUSE
STOP
PLAY
OK
FFW
REW
CLEAR
TITLE
DISC
TRACKING
OPEN/CLOSE
12
6
5
4
7
8
9
0
+10
3
• A Timer Recording or Satellite
Link is not available during DVD
to videotape duplication.
• You cannot copy a DVD to a
videotape if you are using
Progressive Scan.
Helpful Hints
1
3