E
n
g
lis
h
18
Getting Started
(continued)
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press
SETUP
to exit the menu item.
Step 4 : Selecting the
matching color system
The color system of the DVD player, disc
and TV should match in order for the
disc to play. Before changing the TV
system, determine the color system of
your TV.
General
Audio
Video
Preference
TY Type
PAL
TV Display
Multi
Progressive
NTSC
Sharpness
Brightness
Contrast
Color
- - Video Setup Page - -
A
Press
SETUP
.
B
Press
to select {
Video Setup Page
}.
C
Press
repeatedly to select {
TV
Type
}, then press
.
D
Use
to select one of the options
below:
{
PAL
}
Select this if the connected TV has the
PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
{
NTSC
}
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{
Multi
}
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
E
Select a setting and press
OK
.
Follow the instructions show on the
TV to confirm the selection.
1. ENSURE THAT YOUR TV SUPPORTS
PAL STANDARD.
2. IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15 SECONDS
FOR AUTO RECOVER.
CANCEL
OK
CONFIRM AGAIN TO USE NEW TV TYPE SETTING.
CANCEL
OK
CHANGING NTSC TO PAL:
F
Press
to highlight {
OK
} and press
OK
to confirm.
To reset to default TV colour
system:
l
Wait for 15 seconds for the auto
recovery.
OR
A
Press
OPEN/CLOSE
ç
on the DVD
player to open the disc tray.
B
Press
numeric keypad ‘3’
on the
remote control for few seconds.
The DVD background menu appears.
Tips:
– Before changing the current TV colour
setting, ensure that your TV supports the
‘selected TV Type’ system.
– If there is no proper picture on your TV,
wait for 15 seconds for auto recovery.
01-39_dvp3120_3124_55_eng2.indd 18
2007-12-12 2:36:18 PM
