10
The language options may vary from
•
different regions.
3
Press
to select a language, then press
OK
.
Turn on progressive scan
Note
To use the progressive scan feature, you
•
must connect a progressive scan TV with the
component video jacks (see “Connect” >
“Connect video cables” > “Option 1: Connect
to the component video jacks” for details).
1
Turn on the TV to the correct viewing
channel for this product.
2
Press
SETUP
.
3
Press
to select
[Video Setup]
.
4
Select
[Progressive]
>
[On]
, then press
OK
.
Auto Standby
DivX(R) VOD Code
OSD Language
Disc Lock
Sleep Timer
General Setup
English
Melayu
Video Setup
Picture Setting
TV Display
TV System
Progressive
On
Off
4 Get started
Prepare the remote control
1
Open the battery compartment.
2
Insert two R03 or AAA batteries with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
Remove batteries if they are exhausted or if
•
the remote control is not to be used for a long
time.
Do not mix batteries (old and new or carbon
•
and alkaline, etc.).
Batteries contain chemical substances, so they
•
should be disposed of properly.
Find the correct viewing
channel
1
Press
to turn on this product.
2
Turn on the TV and switch to the correct
video-in channel. (Refer to the TV user
manual on how to select the correct
channel.)
Select menu display language
1
Press
SETUP
.
»
[General Setup]
menu is displayed.
2
Select
[OSD language]
, then press .
EN
EN.indd Sec1:10
EN.indd Sec1:10
2009-7-29 11:27:43
2009-7-29 11:27:43
