18
C
Connecting additionaldevices
Connecting additionaldevices to the
second scart socket
You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the
EXT 2 AUX-I/O
socket. When playback is started on this additional device the DVD recorder
automatically connects the
EXT 2 AUX-I/O
scart socket with the
EXT 1 TO TV-I/O
scart
socket. You will then see the picture from the additional device on your TV set, even if the
DVD recorder is switched off.
The
TV/DVD
button on the remote control allows you to switch between playback through the
EXT 2 AUX-I/O
scart socket and playback from the DVD recorder.
Connecting additionalvideo recorders
You can connect a video recorder to the
EXT 2 AUX-I/O
socket.
If you have an SVHS video recorder you can also use the
OUT S-VIDEO (Y/C)
socket and the
OUT L AUDIO R
sockets.
Please note:
Most prerecorded video cassettes and DVDs are copy-protected. If you try to copy them you
will see the message '
COPY PROT
' on the DVD recorder's display.
a
When copying video cassettes the display on the DVD recorder
shows '
NO SIGNAL
'
b
Check that the cable is plugged in firmly.
b
If a recording is made from a video recorder, change the tracking on the
video recorder.
b
The DVD recorder may not be able to recognise the video input signal if
this signal is poor or does not comply with relevant standards.
a
When I copy DVD video discs or prerecorded video cassettes the
picture is fuzzy and the brightness varies
b
This happens if you try to copy DVDs or video cassettes that have been
copy-protected. Even though the picture on the TV is fine the recording on
a DVD+R(W) is faulty. This interference is unavoidable with copy-protected
DVDs or video cassettes.
Problem
Connecting additional devices
