Philips DVDR5350H/05, Руководство по обслуживанию, Страница: 12 / 194

EN 12 3139 785 31532 4. Mechanical Instructions
4.5 Dismantling of the Basic Engine (Drive D4.3)
1) Remove 4 screws to loosen the Basic Engine assembly
as shown in Figure 4-11.
Figure 4-11
2) Remove 2 screws to loosen the Bracket Loader and
uncatch the Dust cover assembly.
3) Remove 4 screws to loosen the Cover of the Basic
Engine to reach Service position Figure 4-12.
Figure 4-12: Basic Engine Service Position
Insulation Sheet
4.6 Dismantling of the Analog Board
1) Remove the Basic Engine assembly as given in step 4.4.
2) Remove the HDMI board as shown in Figure 4-13.
Figure 4-13
3) Remove 15 screws on the Rear panel as shown in
Figure
4-13.
Figure 4-14
4) Remove 3 screw mounting the Analog Board to the
Frame Assembly as given in Figure 4-13.
Figure 4-15
5) Service position is achieved by placing the Analog Board
in the vertical position as shown in Figure 4-16.