English
50
Problem
Solution
Troubleshooting
(continued)
No TV signal received
from the recorder.
A TV channel installed
during the DVD
recorder’s automatic TV
channel search is fuzzy or
distorted.
Unable to eject tray.
Disc does not play.
Distorted sound coming
from a connected hi-fi
system or amplifi er.
Unable to play DivX
movies.
The picture is distorted
or black and white during
playback.
– Have your antenna or cable TV signal checked.
– Install the TV channel. Read chapter “System Menu
Options – Tuner Settings” for details.
– Check the video connection between the DVD recorder
and the TV.
– You can further fi ne-tune the signal of the TV channel. Read
chapter on “System Menu Options – Tuner Settings”.
– Exit from any on-screen menu.
– Press STOP to stop any playback or recording, then press
OPEN/CLOSE on the set.
– Insert the disc with the label facing up.
– Wrong region code. The DVD must be coded for ALL
regions or Region 3 or 4 in order to be played back on
this DVD recorder.
– There is no recording on the disc or wrong disc type.
Read chapter “Playback - Playable discs” for details.
– Make sure the disc is not scratched or warped. Clean the
disc or replace a new one.
– Check if the disc is defective by trying another disc.
– Do not connect any cables from the recorder to the
‘Phono’ input of your amplifi er.
– If you are playing a DTS CD, you have to connect the
COAXIAL jack of this recorder to a Hi-Fi system or
amplifi er.
– Check that the DivX fi le is encoded according to the
‘Home Theatre Profi le’ mode with DivX encoder.
– Check that the DivX movie downloaded is a complete fi le.
– The disc does not match with the TV colour system
standard (PAL/NTSC).
– The disc is dirty, clean the disc.
– Sometimes a small amount of picture distortion may
appear. This is not a malfunction.
1_dvdr3460-97_um_en_26851a.indd 50
1_dvdr3460-97_um_en_26851a.indd 50
2007-08-27 1:04:37 PM
2007-08-27 1:04:37 PM