English
20
Step 3: Installation and Setup
(continued)
B
Press
OK
on the remote control to
continue.
The auto scan menu appears.
Cancel
Auto scan the channels.
Channels found: 10
Auto Scan
100%
OK
BACK
Next Page
Prev Page
Note:
Make sure you have successfully
made all the required connections to the
recorder, the TV and Satellite Receiver/
Cable Box (if any) and turned them on.
C
The automatic TV channel search starts.
This process may take several
minutes. Once complete, the program list
menu appears.
Program List
OK
BACK
Next Page
Prev Page
1 P01 On
C03
2 P02
On
C13
3 P03
On
S08
Sort and rename the programs.
PR
Station NICAM CH
Move Up
Move Down
NICAM
Rename
D
In this menu, you can rearrange the
stored channels sequence, rename it or
set your favourite channels list.
If you do not wish to modify/change the
stored channels, press
OK
on the
remote control to continue, see step
H
.
E
Highlight the preset channel you want to
change, then press
W
to move to the
action bar at the left of the menu.
F
Use
ST
keys to select the required
change action.
Sort channel
Highlight {
Move Up
} or {
Move Down
}
in the menu and press
OK
repeatedly to
shift the selected channel to the desired
preset number.
Set the NICAM mode
Highlight {
NICAM
} in the menu and
press
OK
to turn on or off the NICAM
mode.
Note:
NICAM is a digital sound
transmission system. It can transmit either
one stereo channel or two separate mono
channels. Selects {
On
} to improve the
sound transmission or {
Off
} if the
reception is poor.
Rename channel
Highlight {
Rename
} in the menu and
press
OK
to show the keyboard screen.
The maximum input is up to 5 characters.
Note:
Use
W
XST
keys to navigate in
the keyboard menu and press
OK
to
select the character/number/symbol. To
end, move to {
Finish
} in the menu and
press
OK
.
TIPS:
Press
OK
to go to the next setup page. Press
BACK
to return to the previous setup page.
1_dvdr3460-97_um_en_26851a.indd 20
1_dvdr3460-97_um_en_26851a.indd 20
2007-08-27 1:04:32 PM
2007-08-27 1:04:32 PM