91
a
No picture appears on the TV after switching
Check the display of your DVD recorder.
'PRO': 'Progressive Scan' is on
No display: 'Interlaced' is on. Switch your TV to the corresponding
input jack or select the corresponding connection. You can also
switch the Component video output signal as follows:
1
Disconnect the recorder's power cord.
2
Hold down
N
on the DVD Recorder while reconnecting the
power cord. 'PRO' (progressive scan) appears on the display.
3
If you want to switch back, repeat steps
1
and
2
. 'PRO' disappears
from the display. The DVD Recorder is switched to 'Interlaced.'
Problem
Sound settings
Depending on the audio outputs being used, this menu provides you with a selection of settings.
If you are only using the analog audio outputs (red and white
AUDIO L/R OUT
,
AUDIO L/R
OUT
jacks), select '
Off
' in the '
Digital output
' menu.
Sound
Digital output
All
Analog output
Stereo
Night mode
Off
'
Digital output
'
You can select one of the following settings for devices that are connected to the
COAX
OUT
or
OPTICAL AUDIO OUT
jacks:
'
All
'
: Dolby Digital and DTS signals are going out unchanged to the digital output. MPEG-2
multi-channel signals are converted to PCM (Pulse Code Modulation).
Use receivers/amplifiers
with a digital multi?channel sound decoder
.
'
PCM only
'
: Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code
Modulation).
For receivers/amplifiers
without a digital multi?channel sound decoder
.
'
Off
'
: digital output is off.
For devices
with an analog audio input
.
'
Analog output
'
You can select from the following settings for devices connected to the analog outputs (
AUDIO
L/R OUT
,
AUDIO L/R OUT
).
'
Stereo
'
: For devices that use neither DolbySurround nor TruSurround. Only use this setting
when the DVD Recorder is connected to a stereo TV.
'
Surround
'
: Dolby Digital and MPEG-2 multi-channel are mixed to a Dolby Surround-compatible
two-channel output signal.
For devices
with a Dolby Surround / Pro Logic decoder
.
ENGLISH
User preferences