Philips DVD 620, Руководство по обслуживанию, Страница: 32 / 59

Diagnostic Software Descriptions and Troubleshooting EN 32 DVD 620 /0X1 5.
5.8.3 Display PWB Nuclei
4242 “Unexpected response from Basic Engine”
4243 “Communication time-out error”
4244 “Basic Engine returned error number 0xXX”
4245 “Sledge could not be moved to home
position”
4246 “Focus loop could not be closed”
4247 “Motor not on speed within time-out”
4248 “Radial loop could not be closed”
4249 “PLL could not lock in accessing or tracking
state”
4250 “Subcode or sector information could not be
read”
4251 “Requested subcode item could not be
found”
4252 “TOC could not be read in time”
4253 “Seek could not be performed”
4000 Test successful
4001 “Parity error from Basic Engine to Serial”
4002 “Unexpected response from Basic Engine”
4003 “Communication time-out error”
4004 “Basic Engine returned error number 0xXX”
4005 “Radial loop could not be closed”
4020 Test successful
4021 “Parity error from Basic Engine to Serial”
4022 “Unexpected response from Basic Engine”
4023 “Communication time-out error”
4024 “Basic Engine returned error number 0xXX”
4400 Test successful
4401 Test successful
4100 Test successful
4101 “Parity error from Basic Engine to Serial”
4102 “Unexpected response from Basic Engine”
4103 “Communication time-out error”
4104 “Basic Engine returned error number XX”
4120 Test successful
4121 “Parity error from Basic Engine to Serial”
4122 “Unexpected response from Basic Engine”
4123 “Communication time-out error”
4124 “Basic Engine returned error number XX”
4300 Test successful
4301 “Parity error from Basic Engine to Serial”
4302 “Unexpected response from Basic Engine”
4303 “Communication time-out error”
4304 “Basic Engine returned error number 0xXX”
4320 Test successful
4321 “Parity error from Basic Engine to Serial”
4322 “Unexpected response from Basic Engine”
4323 “Communication time-out error”
4324 “Basic Engine returned error number 0xXX”
3700 “Version: X.Y.Z”
3701 “Parity error from Basic Engine to Serial”
3702 “Unexpected response from Basic Engine”
3703 “Communication time-out error”
3704 “Basic Engine returned error number 0xXX”
5800 Test successful
Error
code
Error text
5820 Test successful
5840 Test successful
5860 Test successful
5801 "Unexpected response from Basic Engine"
7000 "Manuf. ID: <XX>" "Device ID: <YY>"
7001 "Comm Test Failed"
7002 "Load Cmd Failed"
7003 "Load Dat Failed"
7004 "Run Cmd Failed"
7100 "ROM Checksum: XXXX"
7101 "Comm Test Failed"
7102 "Load Cmd Failed"
7103 "Load Dat Failed"
7104 "Run Cmd Failed"
Error
code
Error text
3000 “Test successful”
3001 “Disp not responding”
3002 “Disp key no response”
3003 “One or more patterns not correct”
3004 “Disp type invalid”
3020 “Test successful”
3021 “Disp not responding”
3022 “Disp key no response”
3023 “One or more patterns not correct”
3040 “Test successful”
3041 “Disp not responding”
3042 “Disp key no response”
3043 “One or more patterns not correct”
2700 “Model name in wich the test is running”
2701 “Disp key no response”
2702 “Disp not responding”
2707 “Stop key not pressed”
2708 “Pause key not pressed”
2709 “Play key not pressed”
2710 “Open/close key not pressed”
2713 “Previous key not pressed”
2714 “Next key not pressed”
2715 “More than one key not pressed”
2716 " Audio key not pressed"
2900 “Test successful”
2901 “Slave not responding”
2902 “Slave keyboard not responding”
2903 “Standby led not working”
2800 “Test successful”
2801 “Slave display controller not responding”
2802 “Slave keyboard not responding”
2803 “No key press received from remote control”
2600 “The ROM version of the slave processor =
0xXX, and the internal ID = 0xYY”
2601 “I2c bus busy”
2602 “I2c bus not working“
6000 P50 test
Error
code
Error text