POWER
MARKER
TIMER SET VCR/TV MEMORY
SPEED
REC
/OTR
OUTPUT SELECT
3
4
5
6
7
8
9
ZOOM
TIME SEARCH
SLOW
STATUS/EXIT
SEARCH MODE
DISPLAY
0
+10
2
1
VCR
DVD
E
B
OK
D
H
/
L
K
/
G
C
CLEAR
REPEAT
SETUP
MENU
TITLE
RETURN
MODE
SKIP/CHANNEL
CHANNEL/SKIP
A-B
AUDIO
ANGLE
SUBTITLE
F
One-Touch Recording 35
1
Press the VCR button, then press the CHANNEL
o
/
p
but-
tons or the Number buttons to select the channel you want
to record.
OTR (0:30)
CH12
2
Press the REC(ord)/OTR button repeatedly until the desired
recording length (30 minutes to eight hours) appears on the
screen. Recording will begin immediately.The REC(ord)/OTR light
and the TIMER SET light will appear on the front of the DVD/VCR.
The One-Touch Recording (OTR) feature allows you to set an imme-
diate timed recording 30 minutes to eight hours long. Before you
begin:
●
Place the DVD/VCR in VCR mode. Press the OUTPUT SELECT
button so that the green VCR OUTPUT light appears on the front
of the DVD/VCR.
●
Place the DVD/VCR in VCR position. Press the VCR/TV button so
that the VCR/TV light appears on the front of the DVD/VCR.
●
Set up the TV channels at the DVD/VCR. Details are on page 17.
●
Select a recording speed (SP, SLP) with the SPEED button.
●
Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape’s record tab is intact and the tape is long enough to
record the program(s).
●
If the end of a tape is reached during an OTR, the DVD/VCR will
eject the tape.The DVD/VCR will switch to DVD mode immedi-
ately, and the TIMER SET light will blink.To let the OTR continue,
insert another tape in the DVD/VCR.
To return to VCR mode, press the TIMER SET button on the front
of the DVD/VCR, then press the OUTPUT SELECT button so that
the green VCR OUTPUT light appears on the front of the
DVD/VCR.
3
To stop an OTR before recording is finished, press the Stop
C
button.
To cancel the OTR but continue recording, press the REC(ord)/OTR
button repeatedly until REC appears in the upper left corner of the
TV screen. (STATUS must be ON. See page 23 for details.) The
REC(ord)/OTR light will remain on the front of the DVD/VCR, but
the TIMER SET light will disappear.
When the OTR finishes, if no timer recordings are set, the TIMER
SET light will blink.The DVD/VCR will switch to DVD mode auto-
matically. To return to VCR mode, press the TIMER SET button, then
press the OUTPUT SELECT button so that the green VCR OUTPUT
light appears on the front of the DVD/VCR. (The TIMER SET light
will disappear.)
• To check the time remaining for an
OTR, press the DISPLAY/STATUS/EXIT
button.
• To change the recording length while an
OTR is in progress, press the
REC(ord)/OTR button until the desired
length appears on the screen.
• If you begin an OTR when another
recording is paused, the OTR will begin.
• You can not pause an OTR.
• If the preset time for a timer recording
comes up during an OTR, the OTR has
priority.A message will remind you
when the timer recording was sched-
uled to begin.You may let the OTR con-
tinue; the timer recording will not take
place. Or, stop the OTR and press the
TIMER SET button immediately.The
timer recording will take place if you
press the TIMER SET button before the
timer recording’s scheduled start time.
Helpful Hints
2
1
3
VCR
DV910(H9100).QX33 01.8.9 10:26 AM Page 35
