7.2.1
Channels installation
This feature is used to select the type of installation from
the following options:
7.2.1.1 Update
This option is used to automatically scan for new channels
and add these to the channels already installed.
To launch an update:
- Select "Update" using the
u
or
i
button.
- Press the "OK" button to launch the update.
The "Update in progress" screen is displayed, indicating the
scanning progress and number of channels found. Press
"BACK" to cancel the operation.
7.2.1.2 Custom update
This option is used to manually scan for new channels and
add these to the channels already installed.
To perform a custom update:
- Select "Custom Update" using the
u
or
i
button.
- Move to "Channel Number" using the
y
button.
- Select a channel number using the remote control number
buttons.
- Press the "OK" button to tune to the channel number.
- Press "OK" again to launch installation.
The "Manual update in progress" screen is displayed,
indicating the scanning progress and number of channels
found.
7.2.1.3 Full reinstallation
This option is used to fully reinstall all available channels.
To perform full reinstallation:
- Select "Full reinstallation" using the
u
or
i
button.
- Press the "OK" button to launch the reinstallation.
The "Full reinstallation progress" screen is displayed,
indicating the scanning progress and number of channels
found.
7.2.1.4 Installation success/failure
Depending on the installation results, a screen is displayed:
- Either indicating the number of channels found.
- Or indicating that installation failed.
In both cases, press the OK button to go back to the main
menu.
22
CHANGING THE SETTINGS OF YOUR RECEIVER
English
Doc.DTR2000 version N/B 19/12/03 9:01 Page 22