Philips DS9800W/10, Руководство пользователя

Страница: 17 / 29

17
EN
Change the internal Wi-Fi settings of
DS9800W
2QWKH'6:FRQÀJXUDWLRQZHESDJH
you can change the internal Wi-Fi settings of
DS9800W for connection of DS9800W to
your existing home Wi-Fi network.
Note
‡
0DNHVXUHWKDWWKHVHWWLQJVRQWKHFRQÀJXUDWLRQZHE
page match your home Wi-Fi network settings that you
wrote on paper.
‡ Follow the on-screen instructions to
FKDQJHDQGFRQÀUPWKHLQWHUQDO:L)L
settings of DS9800W.
»
After a while, the indicator on the back
of DS9800W stops blinking and stays
green, and the unit beeps.
»
DS9800W is connected to your
existing home Wi-Fi network
successfully.
Note
‡
If the LED indicator on DS9800W does not stay
green steadily, it means that the Wi-Fi connection has
failed. Please power off both your Wi-Fi router and
DS9800W and then power on them again to see
whether DS9800W can be connected to your home
Wi-Fi network. If the problem remains, try the above
procedures again.
‡
$IWHU\RXÀQLVKWKHDERYHFKDQJHVRUSRZHURIIDQG
power-on of DS9800W, the new Wi-Fi network
created by DS9800W will disappear.
Tip
‡
If you like, you can change the name of your DS9800W
in
Advanced settings -> AirPlay Device Name on the
'6:FRQÀJXUDWLRQZHESDJH7KLVLVKHOSIXOZKHQ
you have multiple Philips AirPlay-enabled devices in
your house and you need to distinguish between them.
‡
If you want to enter the network name (SSID) manually
(for example, if you want to hide your SSID), go to
Advanced settings -> CONFIGURE MANUALLY on
WKH'6:FRQÀJXUDWLRQZHESDJH