Philips DreamStation 2 Скачать руководство пользователя | Manualshive

Страница: 11 / 68

background image

- 7 -

Tobacco use

Tobacco smoke may cause tar build up within the device.

Device
placement

Do not place the device in or on any container that can collect or hold water. Take
precautions to protect furniture from water damage.

Do not place the device directly onto carpet, fabric, or other flammable materials.

Do not plug the device into an outlet controlled by a wall switch.

Do not move the device while the humidifier water tank has water in it.

Humidifier
water tank

Remove the humidifier water tank, empty all water, and replace the empty humidifier
water tank before transporting the device.

Do not fill the humidifier water tank above the maximum fill line. If the humidifier water
tank is overfilled, water may leak into the therapy device, humidifier, or onto your
furniture. Damage to the humidifier or therapy device may occur.

Use only room temperature distilled water in the humidifier water tank. Do not put
any chemicals or additives into the water. Possible airway irritation or damage to the
humidifier water tank may result.

If using the integrated humidifier, do not start therapy without the humidifier water
tank installed.

Do not attempt to fill the humidifier water tank while it is still connected to the device.

Cleaning

Do not immerse the device or allow any liquid to enter the enclosure or the inlet filter.

Do not steam autoclave the device. Doing so will destroy the device.

Do not use harsh detergents, abrasive cleaners, or brushes to clean the system.

Only the cleaning procedures listed in this manual are recommended by Philips
Respironics. Use of other cleaning processes, not specified by Philips Respironics,
may affect the performance of the product.

«
...
9
10
11
12
13
...
»

Содержание DreamStation 2





































































Отзывы:

Нет отзывов

Похожие инструкции для DreamStation 2

WHOLE HOUSE DEHUMIDIFIER

Бренд: Unitary products group Страницы: 16

Бренд: ECG Страницы: 114

Бренд: Lanaform Страницы: 56

Бренд: Eco Air Страницы: 17

Бренд: Hunter Страницы: 2

Бренд: Gree Страницы: 20

Бренд: MSW Motor Technics Страницы: 11

Herrmidifier G100

Бренд: Trion Страницы: 2

Бренд: Trion Страницы: 2

Бренд: MERMAID MARINE Страницы: 3

Бренд: Respironics Страницы: 47

Бренд: Bort Страницы: 62

Бренд: GET Страницы: 8

Бренд: Nortec Страницы: 110

Бренд: MoistAir Страницы: 1

Бренд: DAVIS Страницы: 2

L/M-STAT AMV Series

Бренд: Daitsu Страницы: 322

Бренд: East Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды