DPM 9450 - User Manual
21
Entering user-defined labels
A user-defined label is an alphanumeric string which can have up to 13 characters. Such a label is entered
directly on the DPM. If and how many user-defined labels can be entered depends on the corresponding setting in
SpeechExec Dictate
. For more information, refer to the Online Help delivered with the program.
When entering user-defined labels on the DPM you can use the characters A-Z and the numbers 0-9; spaces are
also allowed.
To enter a user-defined label, do the following:
1. Press the Jog Dial for about two seconds to access the DPM menu.
2. Go to the menu entry for user-defined labels. If you have previously entered a user-defined label, the menu
entry displays this label.
3. To start editing the label, press the Jog Dial again.
Note:
If the mandatory user input option for entering user-defined labels has been set in
SpeechExec Dictate
,
you will immediately access the DPM menu at this level.
4. Select or change the first character/number of the label by moving the Jog Dial up or down. Confirm a
character/number selection by pressing the Jog Dial.
5. When you have entered the complete label string, confirm by pressing the Jog Dial for about two seconds.
Additional information
•
If there is more than one user-defined label enabled, you will automatically go to the next label upon
confirming the first label:
•
To delete a character from a label string, press the DEL (Delete) button briefly. To discard any changes you
have made and to exit the DPM menu, press the DEL button for about two seconds.
•
To insert a character into a label string, press the INS/OVR (Insert/Overwrite) button.
•
To move one character to the left, press the REC (Record) button on DPM 9450/00; on DPM 9450/52, press
the FFWD (Fast Forward) button.
•
To re-use an already existing label without changing it, confirm the label by pressing the Jog Dial for about two
seconds. The DPM will beep and you are required to confirm again.
Assigning Keywords
The DPM allows you to personalize your dictations via predefined Keywords. For this purpose, you create a
configuration file on the PC using
SpeechExec Dictate
. For DPM 9450/00 and DPM 9450/52 this configuration file
can have up to five Keywords defined to be used on the DPM. Each Keyword has a usage string and can have up
to 20 content strings.
Note:
Assigning Keywords as described below is only available if the DPM has not been configured additionally
with the
Linked Keywords
setting in
SpeechExec Dictate
.
Содержание DPM 9450
Страница 1: ...DPM 9450 User Manual ...