Running
person
Icon used for the activity
menu and indication for the
activity running
Cycling
Cycling activity
Fire
Total amount of burned
calories (total energy
expenditure).
Fire and
active
person
Amount of burned calories
through sustained physical
activity (active energy
expenditure)
Steps
Steps taken
Running
person
with clock
Active minutes
Check
mark
Indicates successful
operation, e.g. for pairing or
firmware update.
Excla ma-
tion mark
Indicates an error, e.g.
during pairing, syncing or
firmware update
Main menu
The clock screen of the watch shows the current
time that it synced with your smartphone. To
access the main menu, tap on the
menu button
(Fig. 6)
. The main menu has 6 different menu
options which provide information about your
activity, heart rate, sleep, time functions and
settings. You can manually add information about
your food intake in the dedicated menu section.
Tap on the touch ring near the icon of the menu
option you want to
access (Fig. 7)
. To return to the
main menu, tap on the menu button. From the
main menu, return to the clock screen by tapping
the menu button again.
The watch does not have a touch screen, only the
ring around the display responds to touch. The
touch interface does not function when it is wet.
Wipe the glass dry to enable it again.
Shortcuts menu
Use the shortcuts menu to go straight to your
current heart rate, today’s burned kilocalories
(active and total energy expenditure), steps taken
and active minutes. In your clock screen, swipe left
or right on the lower part of the touch
ring (Fig. 8)
to navigate through the shortcuts menu options.
Active energy expenditure
Active energy expenditure shows today’s amount of
burned calories through sustained physical activity.
of skin irritation. If you use skin care products, do so
sparingly on the areas of the skin that are covered
by the watch. The watch is splash proof with a 1 atm
rating, which allows you to use it outdoors in the rain.
Replacing the strap
The Philips health watch comes with a second
strap that accommodates most common small size
wrists. The straps have quick release pins which
allow for easy change of straps.
If you want to use the smaller strap:
1 Turn the watch upside down.
2 Release the pin of the
strap (Fig. 4)
.
3 Gently remove the strap.
4 Position the watch correctly, lock one side of
the new strap in the watch, unlock the pin of
the new strap and lock the strap in the
watch
(Fig. 5)
.
User interface
The Philips health watch has a touch sensitive
ring around the display. You can use the touch
sensitive ring to navigate the menus.
User interface icons
Sym
bol
Descrip
tion
Explanation
Heart
Heart rate menu and
indication of heart
rate detection during
measurement.
Bed
Sleep
Fork and
knife
Food intake
Clock
Menu icon for the
stopwatch, timer and alarm
menu and icon for the
stopwatch.
Hourglass
Timer function
Bell
Indicates alarm is set
Cogwheel Settings
Battery
status
Indicates status of battery
Lock
Indicates display is locked
Walking
person
Indication of the activity
walking
If you already have another Philips health
connected device, go to the settings of the app
and add a new device.
Tip: If the pairing connection is lost and you
want to pair the same phone again, see chapter
‘Troubleshooting’ for more information.
Sync and store personal health data in
the app
Your personal health data is stored in Philips’
cloud-based platform and displayed in the Philips
HealthSuite health app. Only when the health
app is active (or active in the background) and
Bluetooth is enabled on your smartphone, your
personal health data can be synchronized.
1 Open the Philips HealthSuite health app and
activate Bluetooth on your mobile device.
Keep the mobile device and the health watch
within syncing distance (no more than 6 feet /
2 meters from each other, in the same room).
2 Once successfully connected, the
measurement results are synced to the Philips
HealthSuite health app.
If the sync is successful, the measurement results
are displayed in the Philips HealthSuite health app,
where you can check your personal health data.
Note: Some measurements take up to 24 hours to
begin to display data.
Note: If you are unable to sync, see chapter
‘Troubleshooting’ for more information.
Firmware update: the app will notify you when
new firmware of the health watch is available and
will ask you whether you want to update it.
Wearing the health watch
Always wear the Philips health watch on the outside
of your wrist, in direct contact with your
skin (Fig. 2)
.
Make sure the watch is not on your wrist
bone (Fig. 3)
.
The straps need to be tight, but comfortable
around your wrist to ensure a correct heart rate
measurement. If you feel any discomfort due to the
straps, give your skin some rest by not wearing the
watch for a short period of time. When refastening
the watch, try loosening the strap a notch.
If you continue to feel discomfort after a short
period of rest and loosening the strap, remove the
device and call 1-844-531-6861 for assistance and/
or consult your doctor.
Note: Please check and if necessary, change the
setting ‘handedness’ and ‘wearing position’ in the
device settings menu in the Philips HealthSuite
health app. This is to indicate if you are left or right
handed and the side that you wear your watch on.
Remove the watch at least once a day (e.g. before
or during a meal) to clean your wrist/arm with some
mild soap and water. Clean the watch regularly,
especially if your watch becomes dirty or wet during
an activity. Make sure that your watch and arm are
dry before refastening the watch to reduce the risk
Battery charge indications
Battery
symbol
Battery charge indication
Battery is charging
Battery is almost empty and requires
charging
When initially charged properly, fully charged
batteries can last for approximately four days.
When the battery is almost empty and requires
charging, the battery icon is shown on the clock
screen. When the battery is empty, the display
turns off and no further data will be stored.
Note: Tap on the right or left side of the touch ring
in the clock screen to see your battery status.
Pairing and personalizing the Philips
health watch
The device is equipped with Bluetooth
®
. You
can sync your personal health data to iOS
®
and Android™ smartphones and tablets using
Bluetooth wireless technology. Download the
Philips HealthSuite health app from the App
Store or Google Play. Use the search term ‘Philips
HealthSuite health’. The app is available for iOS
®
8.0+ and Android™ 4.4.2+ operating systems.
It is very important that you provide the right
profile data in the app to enable accurate
measurements.
1 Place the health watch in the charging cradle
and charge the device.
2 Download the Philips HealthSuite health app
on your mobile device.
3 Open the app and the setup wizard will guide
you through the steps to create a user profile. In
the page ‘Add a device’ select the Health watch
from the list of devices.
4 Tap the ‘>’ icon on the watch to enable pairing
mode.
5 When connected via Bluetooth, the app will
show a pop-up asking you to pair.
6 Make sure the app is active and Bluetooth is
enabled when pairing is in progress.
-
Keep the mobile device and the health
watch within syncing range (no more than 6
feet /
2 meters from each other, in the same room).
-
Do not close the app and do not turn
Bluetooth off while pairing is in progress.
When the health watch is successfully paired with
your mobile device, the firmware of the watch will
be updated to match the local language, time,
profile settings and the latest features. The watch
can now automatically sync your personal health
data to your mobile device via Bluetooth.
Pairing the health watch to your mobile device is
only necessary once, unless you want to pair to
another smartphone.
77%