4 MECHANICAL
INTERFACE
The camera body has two fixing possibilities:
•
Three M3 screw holes in the bottom of the camera. The
two in the camera front end are the most important one
because this comprises the sensor.
•
The camera neck can be clipped onto a fixed ring
(
∅
28mm H7).
The sensors optical axis is adjusted with respect to the
centre of the C-mount interface. The sensor rotation is
aligned to be parallel with the bottom of the housing (the
two M3x5 screw holes).
Ø28 mm H7
2x M3 x 5
21.0mm.
2/3" CMOS sensor
C-mount
M 23.2
47.0mm.
35.
0
mm.
Figure 4-1: Dica 220 front view
47.0mm.
8
6
.0
mm.
4.
9
28.0mm.
21.0
M3 x 3mm
M3 x 5mm
7.5
55.0
13
.5
Figure 4-2: Dica 220 bottom view
Page 12
2005-06-27
