Philips DCR 2021, Руководство пользователя

Страница: 69 / 92

69
EN
6.9 Recording timers
Recording timers are used to perform VCR or DVD
recordings.
6.9.1 Set a timer from the EPG
6.9.1.1 Setting a timer on the programme you
are watching
1
Press EPG .
2 Press TIMER .
6.9.1.2 Setting a timer on a future programme
1
Press EPG .
2 Move to the programme you want to record.
3 Press TIMER .
4 Proceed as indicated in paragraph 1 0. 1 .
6.9.2 Setting a timer via the Timer
Manager
Refer to paragraph 1 0. 1 .
6.9.3 Deleting an active timer
A timer is active. Recording is signalled by the front LED
lit in dimmed green in TV or Radio mode or dimmed
orange if your receiver is in standby.
To delete the active timer:
1
If your receiver is in standby, press P+ , P- , or any
number key of the remote control.
2 Press the key sequence TIMER then 0 .The LED is
no longer dimmed and you can change channels.
When a recording timer is active, you cannot change
digital channels, but you can switch to analogue TV
using the TV/STB key and zap through analogue channels.
6.9.4 Your receiver is blocked with
the front panel LED lit in
dimmed green or orange.
Your receiver is blocked because a timer is active.
Press the key sequence
TIMER then 0 to delete the
timer and recover full control of your receiver.
DCR 2021_Premiere_indice 1b 8/03/06 16:29 Page 69