17
EN
8 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
disc/radio/USB/docked product is activated to
play at a preset time.
1
Make sure that you have set the clock
correctly.
2
Press to switch the unit to standby.
•
Make sure that the clock is displayed
(see "Turn on" > "Switch to standby").
3
Press and hold
SLEEP/TIMER
.
»
A prompt to select the source is
displayed.
4
Press
CD
,
FM
,
USB
or
DOCK
to select a
source.
5
Press
SLEEP/TIMER
to confirm.
»
The clock digits are displayed and
begin to blink.
6
Press
/
to set the hour.
7
Press
SLEEP/TIMER
to confirm.
8
Press
/
to set the minute.
»
The timer is set and activated.
To deactivate or re-activate an alarm timer
1
Press to switch to standby mode.
2
Press
SLEEP/TIMER
repeatedly to activate
or deactivate timer.
»
If timer is activated, the display shows
.
»
If timer is deactivated, disappears on
the display.
Note
•
In MP3 link mode, the alarm timer cannot be set.
•
If disc/USB/dock source is selected and the audio
cannot be played, tuner is activated automatically.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press
SLEEP/
TIMER
repeatedly to select a set period of
time (in minutes).
»
When sleep timer is activated, is
displayed.
To deactivate sleep timer
1
Press
SLEEP/TIMER
repeatedly until [OFF]
(off) is displayed.
»
When sleep timer is deactivated,
disappears on the display.
Play from an external device
You can also listen to an external audio device
through this unit.
1
Press
MP3 LINK
to select the MP3 link
source.
2
Connect the supplied MP3 link cable to:
•
the
MP3 LINK
connector (3.5mm) on
the unit.
•
the headphone connector on an
external device.
3
Start to play the device (see the device's
user manual).
Headphone
Plug headphones (not supplied) into the
connector on the unit to listen through the
headphones.