12
EN
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
»
[
AUTO INSTALL - PRESS PLAY
KEY
](auto install - press play key) is
displayed.
2
Press
on the main unit to start
installation.
»
The unit automatically stores radio
stations with sufficient signal strength.
»
When all the available radio stations
are stored, the first preset radio station
is broadcast automatically.
Set clock
Note
•
You can set the clock in standby mode only.
1
Press to switch the unit to standby.
•
Make sure that --:-- (or clock) is
displayed (see "Turn on" > "Switch to
standby").
2
Press and hold
PROG/CLOCK SET
to
activate the clock setting mode.
»
SET CLOCK is displayed.
»
The 12 hour or 24 hour format is
displayed.
3
Press
/
to select 12 hour or 24
hour format.
4
Press
PROG/CLOCK SET
.
»
The hour digits begin to blink.
5
Press
/
to set the hour.
6
Press
PROG/CLOCK SET
.
»
The minute digits begin to blink.
7
Press
/
to set the minute.
8
Press
PROG/CLOCK SET
to confirm.
Turn on
1
Press .
»
The unit switches to the last selected
source.
Switch to standby
1
When the unit is turned on, press to
switch the unit to standby.
•
In standby, press and hold to switch
from normal standby to Eco power
standby or vice versa.
»
In normal standby, the clock (if set)
appears on the display panel.
»
In Eco power standby, the backlight on
the display panel turns off.