background image

2

.

Note : 

This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures :

– 

Relocate the receiving antenna.

– 

Increase the separation between the equipment and receiver

– 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– 

Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT !

modifications not authorized by the manufacturer may void users authority to operate this device.

Nota : Este aparato ha sido probado y cumple con los límites correspondientes a un aparato digital de Clase 
B, según la parte 15 de las Normas FCC. Estos límites han sido diseñados para facilitar suficiente protección 
frente a interferencias perjudiciales en una instalación residencial. Este aparato genera, utiliza y puede emitir 
energía de frecuencias de radio y, si no se instala y utiliza según el manual de instrucciones, puede provocar 
interferencias perjudiciales en las comunicaciones de radio. Sin embargo, no existe garantía de que las 
interferencias no ocurrirán en una instalación particular. Si este aparato provoca interferencias perjudiciales en 
la recepción de radio o television, que se puede identificar encendiendo y apagando el aparato, 
recomendamos al usuario que intente solucionar las interferencias siguiendo una o más de las siguientes 
medidas: 
– Cambie la posición de la antena receptora.
– Aumente la separación entre el aparato y el receptor.
– Conecte el aparato a una toma de un circuito diferente al que está conectado el receptor.
– Consulte con el distribuidor o un técnico de radio/TV con experiencia para que le ayuden.

¡IMPORTANTE!

modificações não autorizadas pelo fabricante, podem causar danos na operação deste aparelho.

Remarque : 

Cet équipement a été testé et a été certifié conforme aux limites imposées pour un 

appareil numérique de Classe B, conformément à la partie 15 des réglements FCC. Ces limites sont 
définies aux fins d'assurer une protection raisonnable contre les interférences nuisibles dans une 
installation résidentielle. Cet équipement génère, utilise et émet des fréquences radio qui, en cas d'une 
mauvaise installation ou d'une utilisation non-conforme aux instructions de ce manuel d'utilisation 
peuvent causer des interférences nuisibles aux communications radio. Il n'y a toutefois aucune garantie 
que des interférences nuisibles ne se produiront pas dans une installation donnée. Si cet équipement 
cause des interférences nuisibles avec votre poste radio ou de télévision, ce que vous pouvez déterminer
en éteignant et en rallumant votre équipement, il est conseillé à l'utilisateur d'essayer de pallier à ces 
interférences nuisibles en prenant l'une ou l'autre des mesures suivantes:
– Changez la position de l'antenne de réception.
– Augmentez la séparation entre l'équipement et le récepteur.
– Branchez l'équipement sur une source d'alimentation différente de celle sur laquelle le récepteur est
   branché.
– Consultez votre distributeur ou un technicien qualifié en la matière pour assistance.

IMPORTANTE !

las modificaciones no autorizadas por el fabricante pueden anular la autoridad de los usuarios para 
utilizar este aparato.

pg001-029_DCM230_37-Eng

12/6/07, 16:22

2

Содержание DCM230































Отзывы: