19
English
Tip
To overwrite a programmed station, store
•
another station with its sequence number.
•
[STEREO]
is default setting for tuner mode.
Under tuner mode, you can press
•
OK
repeatedly
to toggle between
[STEREO]
and
[MONO]
, and
the unit memorizes your setting even if you turn
off the unit or turn to other sources.
Tune to a programmed radio
station
1
Press
RADIO
.
2
Press / repeatedly to select a
programmed radio station.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
Tune to an RDS station.
2
Press
RDS
/
INFO
repeatedly to scroll
through the following information (if
available):
Station name
»
Program type such as
»
[NEWS]
(news),
[SPORT]
(sport),
[POP M]
(pop music)...
Frequency
»
Synchronize clock with RDS station
You can synchronize the clock time on the
unit with an RDS station.
1
Tune to an RDS radio station that
transmits time signals.
2
Press
RDS
/
INFO
for over 2 seconds.
»
[CT SYNC]
is displayed and the unit
reads RDS time automatically.
If no time signal is received,
»
[NO CT]
is displayed.
Note
The accuracy of the transmitted time depends
•
on the RDS station that transmits the time signal.
7 Listen to FM
radio
Note
A maximum of 20 radio stations can be stored.
•
Fully extend the FM antenna for better
•
reception.
Program radio stations
automatically
1
Press
RADIO
.
2
Press and hold
PROGRAM
for 2 seconds.
»
A U T O
appears.
Available stations are stored
»
automatically.
The first programmed radio station is
»
broadcast automatically.
Program radio stations
manually
1
Press
RADIO
.
2
Long
press
/
to search to a radio
station, or press
/
to manually
tune to a radio station.
3
Press
PROGRAM
to program the current
station .
The sequence number blinks with the
»
current frequency displayed.
4
Press / to allocate a sequence
number from 01 to 20 to this radio
station.
5
Press
PROGRAM
to confirm.
The sequence number and the current
»
frequency are displayed.
6
Repeat steps 2-5 to program more
stations.
EN
