English
11
Preparations
Connecting a USB device or memory
card
By connecting a USB mass storage device
(including USB flash memory, USB flash players)
to the system, you can enjoy the device's stored
music through the powerful speakers of system.
●
Insert the USB device's USB plug into the
socket on the set.
OR
for devices with USB cables:
1
Insert one plug of the USB cable (not supplied)
to the
socket on the set.
2
Insert the other plug of the USB cable to the
USB port of the USB device.
Connecting other equipment to your
system
●
Use a line-in-cable to connect AUX IN to the
analogue audio out terminals of an external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder).
Before using the remote control
1
Pull out the plastic protective sheet.
2
Select the source you wish to control by
pressing one of the source select keys on the
remote control (for example USB, TUNER).
3
Then select the desired function (for example
ÉÅ
).
Replacing the remote control
battery (lithium CR2025)
1
Press the slot on the battery compartment.
2
Pull out the battery compartment.
3
Replace a new battery and fully inser t the
battery compartment back to the original
position.
1
2
3
CR2025
CAUTION!
– Remove battery if it is exhausted or will
not be used for a long time.
– Batteries contain chemical substances, so
they should be disposed of properly.
– Perchlorate Material-special handling
may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
pg1-24-DC570_37_Eng
2008.3.20, 16:53
11
