Philips DC156, Руководство пользователя

Страница: 12 / 25

12
English
Preparations
Rear connections
The type plate is located at the rear of the
system.
A
Power
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it
(not available for all versions) .
speaker
(right)
speaker
(left)
FM wire antenna
AC power cord
A
B
B
Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "
RIGHT
" and left
speaker to "
LEFT
", coloured (marked) wire to
"
+
" and black (unmarked) wire to "
-
".
●
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the supplied
speakers.
– Do not connect more than one speaker to any
one pair of
+
/
-
speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
1
2
pg001-pg024_DC156_37_Eng 2010.4.19, 9:42 12