Philips DC1010 - annexe 2, Руководство пользователя

Страница: 9 / 14

Basic operation
1 To select your sound source, adjust the
source selector to: TUNER, AUX, CD ,
iPod, or OFF .
2 To switch off the set, adjust the source
selector to OFF position and check the
cassette keys are released.
Helpful hints:
In tuner mode, if you connect a 3.5 mm aux-in
cable, the source changes to AUX automati-
cally.
Adjusting volume
Adjust the volume with the VOLUME
control.
Radio reception
1 Adjust the source selector to TUNER .
2 Adjust BAND to FM or AM as your
desired band.
3 Turn TUNING to tune to a station.
• For FM , extend and turn the telescopic
antenna for best reception. Reduce its length
if the signal is too strong.
• For AM , the set uses a built-in antenna.
Direct this antenna for best reception by
turning the whole set.
4 To switch off the radio, adjust the source
selector to OFF position.
Playing a CD
This CD player plays Audio Discs including
CD-Recordables and CD-Rewritable.
• MP3 CD-ROMs, CD-I, CDV,VCD, DVD or
computer CDs are not possible for playback
on this set.
IMPORTANT!
•
CDs encoded with copyright protection
technologies
by some record companies may
be unplayable by this product.
1 Adjust the source selector to CD .
2 Open the disc door.
3 Insert a CD with the printed side facing up
and press the CD door gently to close.
➜
Display shows -- and later, the total
number of tracks. (See
2
,
3
)
4 Press
2;
on the set to start playback.
➜
Display:
2
and the current track number.
(See 4 )
5 To pause playback press
2;
. To resume
playback, press
2;
again.
6 To stop CD play, press
9
.
Helpful hints:
CD play will also stop when:
– you open the CD compartment;
–
you select
TUNER, AUX,
or
OFF
sound
source;
– the CD has reached the end of playback.
Selecting a different track
•
Press
5
or
6
once or repeatedly until the
desired track number appears in the display.
• In the stop/pause position, press
2;
to start
playback.
Basic Operation/Radio CD Player
IFU_DC1010_37_ENG 2010.5.4 9:57 Page 9