14
Calling
Answering a third call (Network
dependent)
If you are in a call and have one call on hold, you can also
receive a third call. To do so, you must either end one of
the calls or introduce the new caller to a conference.
This service is limited to two current communications
(one active and one on hold).
Conference call (Network dependent)
A conference call is activated by making several
outgoing calls or from a multiple call context. It
allows you to connect up to five parties at the same
time.
1.
Make a call with the first member, followed by
the second one (see “Making a second call
(Network dependent)” on page 13).
2.
Press
L
Options
and select
Conference
. Repeat
the process until all members are connected
(maximum five).
You can press
,
to switch between the two calls.
3.
Select
Remove party
to disconnect a member
from the conference, or select
Private call
to have
a private call with this member only (other
members are put on hold).
4.
Press
)
to disconnect all calls at once.
If there is an incoming call during the conference call
and there are less than five members, you can accept
this new call and add this member to the
Conference
call (if five members are already connected, you can
answer the call, but not add it to the conference).
Press
)
To reject the call.
Press
,
or
L
Options
To open the options list. You can
select
Replace active call
to answer
the incoming call and end the
currently active call. Select
Transfer
call
to transfer the call, select
Conference
to start a conference
call, select
Switch calls
to switch
between the three calls, or select
Mute
to mute the call.
